 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| OTS-1HD2DTR Optiva Standard, TM 1 HD-SDI 270-1485 Mbps w/Loopback and 2 Duplex RS-232/422/485 Data HD-SDI Video and Audio Transmission The OTS-1HD2D provides for the digital transmission of 1 Channel of HD-SDI Video with Loopback and 2 Channels of Duplex Serial Data, at absolute broadcast quality. ST, LC, SC or FC ST, LC, SC or FC Video System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19" rack-mountable card cage (CC-16-100) or one of our smaller OptivaTM Desktop Card Racks (DTCR Series). The Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See "Accessories" for power supply specifications. OptivaTM Upgrade Path S T A T U S A L E R T HD-SDI Video In HD Video Loopback Out A L E R T HD-SDI Video Out HD Video Loopback Out Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See "OptivaTM Upgrade Path". Audio S T A T U S Serial Data In Serial Data Out OptivaTM VAD Transmission OptivaTM VAD Transmission Data OTS-1HDT2DTR OTS-1HDR2DTR Features * Uncompressed HD-SDI Video and Serial Data over one fiber * TDM - Single fiber, dual wavelength * True DC restoration * Flat frequency response * Complies with SMPTE standards for Video transmission * Compatible with MDM-7000 Series for WDM and CWDM multiplexing * No EMI or RFI and no ground loops * Stand alone or rack-mount * Ideal for Broadcast/Studio and Professional AV applications This system can be purchased without an optical port as an add-on to an existing OptivaTM system daisy-chain. (See "Non-Optical Version" below). The OptivaTM bandwidth requirement of this system is 1716 Mbps. Versions Available* Wavelength (nm) & Fiber Transmit/Receive** Receive/Transmit** OTS-1HDR2DTR-B3M/B2-XX-IC OTS-1HDR2DTR-B3/B2-XX-IC OTS-1HDR2DTR-B3D/B2-XX-IC OTS-1HDR2DTR-L4/L4-XX-IC OTS-1HDR2DTR-NOC-IC Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 14 21 Varies N/A Range*** (km) Form Factor 1.5 20 40 20-70 N/A IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) 1310/1550 Multimode OTS-1HDT2DTR-B2/B3M-XX-IC 1310/1550 Singlemode OTS-1HDT2DTR-B2/B3-XX-IC 1310/1550 Singlemode (D) OTS-1HDT2DTR-B2/B3D-XX-IC 1270-1610 SM (CWDM) OTS-1HDT2DTR-L4/L4-XX-IC Non-Optical Version OTS-1HDT2DTR-NOC-IC Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 * info@opticomm.com * www.opticomm.com * Contact Opticomm for custom requirements. NOTE: The systems in this category offer transmission of certain signals in set configurations. If your application involves multi-signal transmission and/or would benefit from system upgradeability, please visit the OptivaTM Platform section on page 14. To configure an OptivaTM system to your precise needs, please register for the `Product Configurator' at www.opticomm.com SDI & HD-SDI Video Standard Pathological Test Code Nominal Bit Rate Bit error rate Connector Data Connector RS-232, RS-422 Data Rate RS-485 (2 Wire) Data Rate RS-485 (4 Wire) Data Rate Contact Closure Data Rate General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring SMPTE 292M & 259M RP-178 1.485 Gbps; 270 Mbps 10-14 BNC (IEC 60169-8; Gold Plated) OptivaTM Configurable Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data Micro DB25 DC to 1 Mbps DC to 1 Mbps DC to 1 Mbps DC to 1 Mbps RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) CATV/RF & L-Band Optical Switching, Routing & Redundancy Passive Multiplexing Solutions 11 oz Enclosures, Racks & Frames Power Supplies & Accessories Insert Card (IC): 6.3" L x 0.8" W x 4.0" H -20 C to +55 C -40 C to +85 C 0 to 95% non-condensing 9-12 VDC 1A Max per Insert Card Less than 1ms LED Status Indication Compatible with OptivaViewTM SNMP Management Suite Emissions: FCC Part 15, ICES-003, AS/NZS, 3548, EN55022 Immunity: ENVS0204, EN61000-4-2,3,4,5,6,11 Safety: UL1950, CAN/CSA 22.2, NO.950-95 MADE IN THE USA Sample Configuration HD-SDI HD-SDI OTS-1HDT2DTR OTS-1HDR2DTR Local Loopback Second Output |
Price & Availability of OTS-1HD2DTR1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |